Skip to content
Buying security tools · CISO toolkit

Security Tool Evaluation Framework

Compare two to four candidate security products on one weighted scorecard. Set what matters to you, score each product with evidence from your proof of concept, and see the ranking, whether it is too close to call, and whether it changes if you weigh one criterion differently. The proof-of-concept plan and RFP questions are below. Part of the CISO Resource Bundle.

1. The products you are comparing

Compare two to four products. Names stay in your browser.

2. Set the weights

Move a slider to say how much a criterion matters to you. Tick must-have if a product scoring below 3 should be ruled out. Total weight: 100.

20%
15%
15%
20%
10%
12%
8%

3. Score each product

Score from 1 (poor) to 5 (excellent), using evidence from your proof of concept and the vendor's answers. An unscored criterion counts as zero.

Coverage of your threats

Does it address the threats and assets on your own risk register, not the vendor's demo story?

1 = Covers few of your priority threats or assets. 5 = Covers your top threats across the assets that matter.

Integration and APIs

Does it work with your identity provider, SIEM, ticketing and cloud accounts? Is there a documented API you can automate against?

1 = Manual exports, no usable API. 5 = Native integrations with your stack and a documented, rate-limited API.

Operations effort

How many people-hours a week will it take to run, tune and keep up to date? Who on your team will own it?

1 = Needs a dedicated person you do not have. 5 = Runs with your current team and little tuning.

Detection quality in the proof of concept

In your own environment, did it catch the test cases you ran, and how much noise did it create?

1 = Missed key test cases or buried them in noise. 5 = Caught your test cases with alerts an analyst could act on.

Vendor security and data handling

What data leaves your environment, where is it stored, who can reach it, and what independent assurance does the vendor have?

1 = Unclear data flows, no independent assurance. 5 = Clear data flows, current independent report, contractual notification.

Total cost of ownership

Licence plus deployment, training, people time, infrastructure and renewal increases over three years.

1 = High or unpredictable three-year cost. 5 = Predictable cost that fits the budget with headroom.

Contract and exit

Can you leave cleanly? Data export, term length, renewal caps, termination rights and what happens to your data after.

1 = Long lock-in, no data export. 5 = Short term, capped renewals, full export and deletion on exit.

4. Result

Score every criterion for at least two products to see the ranking.

Loading…

Sample report · illustrative data

Sample result: comparing three detection products

Example comparison of three invented endpoint detection products after a three-week proof of concept, using the default weights with detection quality set as a must-have.

Ranking (example)

RankProductWeighted scoreNote
1Product B74.5 / 100Strongest detection in the proof of concept; higher operations effort
2Product A69.3 / 100Best integrations and lowest three-year cost
3Product C63 / 100Fails the must-have: detection quality scored 2

Score grid (1 = poor, 5 = excellent)

CriterionWeightProduct AProduct BProduct C
Coverage of your threats20454
Integration and APIs15534
Operations effort15434
Detection quality in the proof of concept20 (must-have)352
Vendor security and data handling10344
Total cost of ownership12434
Contract and exit8343

What the result says

  • Product B leads by about 5 points. The gap comes from detection quality and coverage.
  • The leader changes if integration and APIs were weighted twice as heavily. Agree that weight with the team that will run the tool.
  • Product C is ruled out because it scored below 3 on a must-have, so it ranks last whatever its total.

About the weights

The default weights are PlayCISO's own starting point for a structured comparison, not an industry figure. Change them to fit your priorities before you score.

Made-up example data. Your own run uses your inputs. Downloads of the full report need Pro.

TL;DR

What this tool is

5 points
  • A weighted scorecard for comparing two to four security products before you buy.
  • Seven criteria: coverage of your threats, integration and APIs, operations effort, detection quality in a proof of concept, vendor security and data handling, total cost of ownership, and contract and exit.
  • Set your own weights and mark must-haves. You get a ranking out of 100, a warning when the top two are too close, and a check on whether the leader changes if one weight doubles.
  • The page also has a proof-of-concept plan and an RFP question list you can use with any vendor.
  • Runs in your browser. Nothing you type is uploaded.

The seven criteria

Agree the criteria and weights before anyone sees a demo. Weights chosen after a favourite emerges tend to justify it.

CriterionDefault weightWhat to look for
Coverage of your threats20Does it address the threats and assets on your own risk register, not the vendor's demo story?
Integration and APIs15Does it work with your identity provider, SIEM, ticketing and cloud accounts? Is there a documented API you can automate against?
Operations effort15How many people-hours a week will it take to run, tune and keep up to date? Who on your team will own it?
Detection quality in the proof of concept20In your own environment, did it catch the test cases you ran, and how much noise did it create?
Vendor security and data handling10What data leaves your environment, where is it stored, who can reach it, and what independent assurance does the vendor have?
Total cost of ownership12Licence plus deployment, training, people time, infrastructure and renewal increases over three years.
Contract and exit8Can you leave cleanly? Data export, term length, renewal caps, termination rights and what happens to your data after.

Proof-of-concept plan

A proof of concept is where most scores come from. Run it the same way for every product.

Before it starts

  • Write down the problem in one sentence and the two or three outcomes that would make you buy.
  • Agree success criteria with the vendor in writing: test cases, pass marks and who judges them.
  • Fix the scope: which environments, how many assets or users, and what is out of bounds.
  • Name an owner on your side and the people who will run it day to day.
  • Check what data the tool will collect during the trial and where it goes. Get approval if it is personal or regulated data.
  • Set an end date. Three to four weeks of real use beats a long, unfocused trial.

During the trial

  • Run the same test cases against every candidate, in the same environment, in the same week if you can.
  • Use test cases from your own incidents, red-team findings or threat model, not only the vendor's demo scenarios.
  • Record every alert or finding: true positive, false positive, missed.
  • Time the routine work: onboarding a new asset, tuning a noisy rule, producing the weekly report.
  • Open at least one support ticket and note how fast and how well it is answered.
  • Test the integrations you depend on with real data: identity, SIEM, ticketing, cloud accounts.

After the trial

  • Score each candidate on this framework within a week, while the details are fresh.
  • Ask the people who used it daily. Their view on operations effort matters more than the demo.
  • Confirm that trial data is deleted, in writing, for every vendor you do not choose.
  • Write a one-page decision record: scores, weights, the deciding factors and the risks you accept.

RFP questions

Send these with your request for proposal. They follow the same criteria, so the answers drop straight into the scorecard.

Coverage and fit

  1. Which of the threats and asset types we listed does the product cover today, and which are on the roadmap?
  2. Which deployment models do you support (SaaS, self-hosted, hybrid), and which regions?
  3. Name two customers of a similar size and sector we can speak to.

Integration and APIs

  1. List your native integrations for identity providers, SIEM, SOAR, ticketing and cloud platforms.
  2. Is your API documented and versioned? What are the rate limits? Can every action in the console be done through the API?
  3. Which log and alert formats can you export, and how?

Operations

  1. How many hours a week does a customer like us typically spend running the product? How do you know?
  2. What does tuning involve, and who does it: us, you or a partner?
  3. What training is included, and what does the support model look like (hours, response targets, escalation)?

Detection and efficacy

  1. Will you support a proof of concept in our environment with success criteria we set?
  2. Which independent tests has the product taken part in? Share the full results, not a summary.
  3. How do you measure and report false positives to customers?

Vendor security and data handling

  1. What customer data does the product collect, where is it stored and processed, and for how long?
  2. Share your current independent assurance report (for example SOC 2 Type II or ISO 27001 certificate with scope).
  3. List your subprocessors. How do you notify customers of changes?
  4. What is your contractual breach-notification commitment to customers?
  5. Is customer data used to train models or improve the product? Can we opt out?

Cost

  1. Give the full three-year cost: licence, implementation, training, support tiers and any usage-based charges.
  2. What drives price increases at renewal, and will you cap them?
  3. What costs sit outside your quote (infrastructure, storage, extra connectors)?

Contract and exit

  1. What is the minimum term, and what are our termination rights?
  2. How do we export all our data and configuration, in what format, and at what cost?
  3. How and when do you delete our data after the contract ends, and will you confirm it in writing?

A judgement aid, not a measurement. The default weights are PlayCISO's own starting point, not an industry average. Keep the evidence behind each score and have procurement and legal review the contract before you sign.

Frequently asked questions

How do I evaluate a security tool?

Start from your own problem and threats, not the vendor demo. Agree the criteria and their weights before you see any product, run a time-boxed proof of concept in your own environment with test cases you choose, score every candidate on the same scale, and write down why you chose. This framework gives you the criteria, the weights, the scoring and a proof-of-concept plan in one place.

What criteria should a security tool evaluation use?

This framework uses seven: coverage of your threats, integration and APIs, operations effort, detection quality in a proof of concept, vendor security and data handling, total cost of ownership, and contract and exit. The default weights put coverage and proof-of-concept detection highest. They are our starting point, not an industry figure, so change them to fit your priorities.

How is the score calculated?

Each criterion is scored 1 to 5. A 1 counts as 0 and a 5 counts as full marks. Each score is multiplied by its weight, the results are added up and divided by the total weight, then shown out of 100. An unscored criterion counts as zero. A product that scores below 3 on a criterion you marked as must-have is ranked last and flagged, whatever its total.

What should a security proof of concept include?

Written success criteria agreed with the vendor, a fixed scope and end date, the same test cases run against every candidate, a record of every true positive, false positive and miss, time spent on routine work, a test of support, and written confirmation that trial data is deleted afterwards. The full checklist is on this page.

What questions should I put in a security RFP?

Ask about coverage and fit, integrations and APIs, the people-hours needed to run the product, proof-of-concept support and independent test results, data handling and independent assurance, the full three-year cost, and how you leave: data export, term length and deletion. The question list on this page groups them under the same seven criteria as the scorecard.

Can I download the evaluation?

Yes. You can download the ranking, score grid, proof-of-concept plan and RFP questions as a Markdown report, or the score grid as CSV. Downloads need Pro. Downloading never uses one of your runs.

The tools people use most on PlayCISO.

All tools